8 Accordion - Level 1 - Service Categories

Tax

8 Accordion - Level 2 - Tax

Preparation, Planning & Consulting

8 Accordion - Level Z - Tax - Preparation, Planning & Compliance

Annual Tax Preparation

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Foreign Bank Account & Foreign Financial Asset Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

IRS Audit Monitoring

Current Service For: Federal

Request New Service Area

Service Description:

Monitor a business's IRS account for either code changes input by the IRS that indicate forthcoming audits, tax liens, or other adverse IRS actions. The service also monitors certain taxpayer submissions to the IRS to check for irregularities to be corrected (e.g. missed payroll tax filings).

Benefit:

Early detections of filing irregularities and IRS actions can save the business interest, penalties, forfeitures, liens, as well as significant time and stress.

Fee:

Typically flat fee.

Fee Schedule:

Typically paid upfront for monitoring over a given time period.

Customer Commitment:

Business signs an IRS Form 2848, usually prepared by the provider.

Risks:

None. The Form 2848 nor the monitoring of a business’s IRS increases any risk of adverse action from the IRS or otherwise flag the account for any additional scrutiny.

Process:

Business provides service provider the necessary information to complete IRS Form 2848. Service provider prepares the IRS Form 2848 and the business signs it. IRf Form 2848 is submitted to the IRS to give service provider access to business’s IRs tax account for monitoring.

Common Industries:

All.

 

Update Service Information

*  *  *  *  *

IRS Penalty Abatement

Current Service For: Federal

Request New Service Area

Service Description:

Recover or reduce IRS penalties as far back as 2001 for failing to file a tax return, pay on time, and/or to deposit taxes when due.

Benefit:

Refund from the IRS or reduction in penalty balance due to the IRS.

ROI:

Reductions of penalty balances due occur immediately. IRS refunds can take between 2 weeks and 6 months.

Fee:

Typically 5%-30% of the value recovered. If negotiated, usually the larger the recovery the lower percentage paid.

Fee Schedule:

Depends on the Business's financial circumstances as well as the size of the recovery. Typically, smaller recoveries require payment upfront while larger recoveries split invoices, 1 to start the service and 1 at the complete of the service or upon actual recovery by the Business.

Customer Commitment:

Business signs an IRS Form 2848, usually prepared by the provider.

Risks:

There are two timing risks. First, if a penalty is still accruing, the service does not stop more penalties from accruing, it only abates previously accrued penalties. For example, if the Business is late on paying their Federal income taxes they are accruing penalties for failure to pay. If the penalties already accrued are abated before the Business pays its Federal income taxes, then failure to pay penalties will continue to accrue after the abatement. In this case, the taxes should be paid first, then the Business should seek abatement of the penalty. The second timing risk is choosing which year to request. Typically, except for particular circumstances, penalty abatements must occur at least 3 years apart. So if the Business is expecting to incur a larger penalty this year then they have in the three previous years, then the Business should wait until the penalty for this year has accrued and seek abatement for the largest penalty within a 4 year period.

Process:

Business provides service provider the necessary information to complete IRS Form 2848. Service provider prepares the IRS Form 2848 and the business signs it. IRf Form 2848 is submitted to the IRS to give service provider access to business’s IRs tax account for investigation into penalty abatement opportunities. Once identified, the service provider often presents those opportunities to the Business, negotiates a fee, then contacts the IRS on the Business’s behalf to negotiate for the penalty abatement.

Common Industries:

All

 

Update Service Information

*  *  *  *  *

Credits, Deductions, Incentives & Methods

8 Accordion - Level Z - Tax - Credits, Deductions, Incentives & Methods

179D Energy Efficiency Deduction

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Commercial Property Value Reassessment & Appeal

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Cost Segregation

Current Service For: Federal

Request New Service Area

Service Description:

Accelerates the depreciation of buildings owned by the business (on balance sheet). Commercial buildings are most often depreciated evenly over a 39-year or 27.5 year period. With Cost Segregation, a portion of a building's depreciation from future years can be brought forward to the current year to increase cash flow.

Benefit:

Increased Federal tax deduction which increases cashflow or Net Operating Losses.

ROI:

Varies widely. Median ranges from 10:1 to 100:1.

Utilization Schedule:

Benefit realized in the first year and often for the 5 - 10 subsequent years.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Business provides service provider with address of the building, specifications and drawings of the building, and the tax asset schedule from the most recent tax return or building costs for new constructions. Business also facilitates a site visit by the service provider.

Risks:

Cost Segregation is a low-risk tax position with low audit rates. Risk exposure occurs when Cost Segregation positions are either (1) not supported by documentation or (2) the segregation of building costs is incorrect.

Risk Timing:

This tax deduction is not currently a red flag to the IRS. If an audit were to occur this would most likely happen, if at all, 2-3 years from the date filed.

Process:

Business provides service provider with documentation, access to building for the site visit cost segregation report will then be delivered to the client who will give this report to their tax provider to include with the tax return when filed.

Common Industries:

Applies to all real estate held for profit.

Authorities For Further Research:

Internal Revenue Code §167; IRS Publication 946; IRS Cost Segregation Audit Techniques Guide; Revenue Procedure (Rev. Proc.) 62-21, 1962-2 C.B. 418.

 

Update Service Information

*  *  *  *  *

Research & Development Credit

Current Service For: Federal

Request New Service Area

Service Description:

Federal tax credit for businesses who make technical improvements to products, processes, computer software, techniques, formulas, or inventions.

Benefit:

A tax refund, reduction of tax liability, or deferred tax asset equal to approximately 6% - 20% of research and development costs in a given year. For some businesses, the credit can be applied against the employer portion of payroll taxes.

ROI:

Typically between 3:1 and 6:1

Utilization Schedule:

Reduction of tax liability is realized at the time on tax payment. Tax refunds often take between 3 to 9 months from filing. Deferred tax assets are recorded upon completion of the service. Payroll tax reduction realized as soon as the first quarter after filing the credit.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Business provides service provider with tax returns, general ledger details, profit & loss statements, W-2s, 1099-MISCs / NECs, R&D related contracts, and R&D workpapers for, at minimum, the year in which R&D is to be claimed and the 3 prior years. In some cases, the service provider will interview Business owners and employees involved in and familiar with the R&D; this maybe occur remotely or in-person on site at the business.

Other Customer Costs:

Lack of responsiveness and organization by the Business or lack of preparedness, expertise, or diligence by the service provider can increase the organizational time and energy required to complete the service.

Risks:

The IRS has increased scrutiny for certain R&D tax credits that come from unlikely businesses or outside the range of normal for the industry. Improper claims can result in forfeiture of the credit, additional interest, and penalties.

Risk Timing:

IRS audits most likely happen, if at all, 1-3 years from the date filed.

Process:

Business provides service provider with requested documentation. Service provider speaks with requested personnel at the Business. Service provider calculates the credit and delivers substantiating report. Tax credit claimed on tax return and/or amended tax return filed to claim refund.

Common Industries:

Automotive, Consumer goods, Aviation & Aerospace, Retail & eCommerce, Food & Beverages, Medical devices, Biotechnology, Oil & Energy, Financial services, Telecommunications, Renewables & Environment, Apparel & Fashion, Logistics & Supply Chain, Craft beer companies, Cannabis companies, Farmers & agriculture, Advertising/Marketing analytics, and Logistics.

Authorities For Further Research:

Internal Revenue Code §41; Audit Techniques Guide: Credit for Increasing Research Activities.

 

Update Service Information

*  *  *  *  *

Controversy & Dispute Resolution

Please select a valid form

International

8 Accordion - Level Z - Tax - International

Foreign Bank Account and Foreign Financial Asset Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Transfer Pricing

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Legal

8 Accordion - Level 2 - Legal

Bankruptcy

8 Accordion - Level Z - Legal - Bankruptcy

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Business & Corporate

8 Accordion - Level Z - Legal - Business & Corporate

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Contract

8 Accordion - Level Z - Legal - Contract

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Employment

8 Accordion - Level Z - Legal - Employment

No Service Listed At This Time

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Import/Export

8 Accordion - Level Z - Legal - Import/Export

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Injuries & Torts

8 Accordion - Level Z - Legal - Injuries & Torts

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Insurance

8 Accordion - Level Z - Legal - Insurance

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Intellectual Property

8 Accordion - Level Z - Legal - Intellectual Property

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Privacy, Internet & Data

8 Accordion - Level Z - Legal - Privacy, Internet & Data

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Patent

8 Accordion - Level Z - Legal - Patent

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Real Estate

8 Accordion - Level Z - Legal - Real Estate

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Securities, Finance & Fundraising

8 Accordion - Level Z - Legal - Securities, Finance & Fundraising

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Trademark

8 Accordion - Level Z - Legal - Trademark

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Tax

8 Accordion - Level Z - Legal - Tax

No Service Listed At This Time

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Audit

8 Accordion - Level Z - Audit

Financial Audit

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Information Systems Audit

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Financial Reporting

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Compliance Audit

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Investigation

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

IT & Cyber Security

8 Accordion - Level Z - IT & Cyber Security

SOC 2 Compliance

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Virtual or Fractional CISO (Chief Information Security Officer)

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Cyber Security Consulting

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

CMMC Compliance

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Penetration Testing

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Managed Detection and Response (MDR)

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Network Security Monitoring

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Accounting & Bookkeeping

8 Accordion - Level Z - Accounting & Bookkeeping

Cash Flow Analysis

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Virtual or Fractional CFO (Chief Financial Officer)

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Financial Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Bookkeeping

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Forensic Accounting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Business Consulting

8 Accordion - Level Z - Business Consulting

Inventory Management

Current Service For: Federal

Request New Service Area

Service Description:

A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company.

Benefit:

One time Federal tax deduction which decreases taxable income.

ROI:

Median ranges from 5:1 to 20:1.

Utilization Schedule:

Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied.

Fee:

See ROI.

Fee Schedule:

Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized.

Customer Commitment:

Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer.

Risks:

This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited.

Risk Timing:

This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed.

Process:

Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years.

Common Industries:

Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building.

Authorities For Further Research:

Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law.

 

Update Service Information

*  *  *  *  *

Compliance

9 Accordion - Level Z - Compliance

Cash Flow Analysis

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Virtual or Fractional CFO (Chief Financial Officer)

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Financial Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Bookkeeping

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Forensic Accounting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Employment Services

9 Accordion - Level Z - Employment Services

Cash Flow Analysis

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Virtual or Fractional CFO (Chief Financial Officer)

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Financial Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Bookkeeping

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Forensic Accounting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

ESG

9 Accordion - Level Z - ESG

Cash Flow Analysis

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Virtual or Fractional CFO (Chief Financial Officer)

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Financial Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Bookkeeping

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Forensic Accounting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Increase Cash

9 Accordion - Level Z - Increase Cash

Cash Flow Analysis

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Virtual or Fractional CFO (Chief Financial Officer)

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Financial Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Bookkeeping

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Forensic Accounting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Property Services

9 Accordion - Level Z - Property Services

Cash Flow Analysis

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Virtual or Fractional CFO (Chief Financial Officer)

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Financial Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Bookkeeping

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Forensic Accounting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Reduce Costs

9 Accordion - Level Z - Reduce Cost

Cash Flow Analysis

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Virtual or Fractional CFO (Chief Financial Officer)

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Financial Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Bookkeeping

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Forensic Accounting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Risk Reduction

9 Accordion - Level Z - Risk Reduction

Cash Flow Analysis

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Virtual or Fractional CFO (Chief Financial Officer)

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Financial Reporting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Bookkeeping

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Forensic Accounting

This service is under construction. Please be patient.

 

Contribute Service Information

*  *  *  *  *

Request New Service

Public Profile

Private Comments

Scroll to Top