RBUNDLE Bettering Business, Simplifying Life Theoriginal, best, only. Anonymousproposal requests. Identity revealed to engage services. Common RFP simplifies the request for proposal process. for Professional Services Tax, Legal, Cyber Security, IT, Audit, Business Consulting, Audit, Bookkeeping, and Accounting. Theoriginal, best, only. Anonymousproposal requests. Identity revealed to engage services. Common RFP simplifies the request for proposal process. for Professional Services Tax, Legal, Cyber Security, IT, Audit, Business Consulting, Audit, Bookkeeping, and Accounting. Services List 8 Accordion - Level 1 - Service Categories Type Use Tax 8 Accordion - Level 2 - Tax Preparation, Planning & Consulting 8 Accordion - Level Z - Tax - Preparation, Planning & Compliance Annual Tax Preparation Go to RFP Email RFP Servicing: International, Federal, Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, D.C., Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming, Puerto RicoRequest New Service Area Service Description: Tax preparation is the process of organizing and submitting your financial information to complete your tax return, which is then filed with the relevant tax authority, such as the Internal Revenue Service (IRS) or state department of revenue, or international tax authority. Benefit: Decide based on a cost-benefit analysis of the expertise and cost of providing the service within your organization versus that of a third-party professional. Expertise ultimately translates into cost as well, as greater expertise can result in more tax savings, less time preparing taxes, and lower risks of audits and penalties. Hiring a third-party professional has the potential benefit of utilizing the Tax Professional Reasonable Reliance Defense to guard against liability for accuracy-related penalties for negligence or intentional disregard of rules or regulations. Update Service Information * * * * * Foreign Bank Account & Foreign Financial Asset Reporting This service is under construction. Please be patient. Update Service Information * * * * * IRS Account Monitoring Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: Monitor a business's IRS account for either code changes input by the IRS that indicate forthcoming audits, tax liens, or other adverse IRS actions. The service also monitors certain taxpayer submissions to the IRS to check for irregularities to be corrected (e.g. missed payroll tax filings). Fee: Typically flat fee. Fee Schedule: Typically paid upfront for monitoring over a given time period. Customer Commitment: Business signs an IRS Form 2848, usually prepared by the provider. Risks: None. The Form 2848 nor the monitoring of a business's IRS increases any risk of adverse action from the IRS or otherwise flag the account for any additional scrutiny. Process: Business provides service provider the necessary information to complete IRS Form 2848. Service provider prepares the IRS Form 2848 and the business signs it. IRS Form 2848 is submitted to the IRS to give service provider access to business's IRs tax account for monitoring. Common Industries: All. Update Service Information * * * * * IRS Penalty Abatement Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: Recover or reduce IRS penalties as far back as 2001 for failing to file a tax return, pay on time, and/or to deposit taxes when due. ROI: Reductions of penalty balances due occur immediately. IRS refunds can take between 2 weeks and 6 months. Fee: Typically 5%-30% of the value recovered. If negotiated, usually the larger the recovery the lower percentage paid. Fee Schedule: Depends on the Business's financial circumstances as well as the size of the recovery. Typically, smaller recoveries require payment upfront while larger recoveries split invoices, 1 to start the service and 1 at the complete of the service or upon actual recovery by the Business. Customer Commitment: Business signs an IRS Form 2848, usually prepared by the provider. Risks: There are two timing risks. First, if a penalty is still accruing, the service does not stop more penalties from accruing, it only abates previously accrued penalties. For example, if the Business is late on paying their Federal income taxes they are accruing penalties for failure to pay. If the penalties already accrued are abated before the Business pays its Federal income taxes, then failure to pay penalties will continue to accrue after the abatement. In this case, the taxes should be paid first, then the Business should seek abatement of the penalty. The second timing risk is choosing which year to request. Typically, except for particular circumstances, penalty abatements must occur at least 3 years apart. So if the Business is expecting to incur a larger penalty this year then they have in the three previous years, then the Business should wait until the penalty for this year has accrued and seek abatement for the largest penalty within a 4 year period. Process: Business provides service provider the necessary information to complete IRS Form 2848. Service provider prepares the IRS Form 2848 and the business signs it. IRS Form 2848 is submitted to the IRS to give service provider access to business's IRs tax account for investigation into penalty abatement opportunities. Once identified, the service provider often presents those opportunities to the Business, negotiates a fee, then contacts the IRS on the Business's behalf to negotiate for the penalty abatement. Common Industries: All Authorities For Further Research: Internal Revenue Manuals (IRM) 20.1.1.3.3.2.1 Penalties Eligible for Abatement: Internal Revenue Code (IRC) 6651; IRC 6656; IRC 6698; IRC 6699 Update Service Information * * * * * Submit If you are human, leave this field blank. Credits, Deductions, Incentives & Methods 8 Accordion - Level Z - Tax - Credits, Deductions, Incentives & Methods 179D Energy Efficiency Deduction Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Commercial Property Value Reassessment & Appeal This service is under construction. Please be patient. Update Service Information * * * * * Cost Segregation Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: Accelerates the depreciation of buildings owned by the business (on balance sheet). Commercial buildings are most often depreciated evenly over a 39-year or 27.5 year period. With Cost Segregation, a portion of a building's depreciation from future years can be brought forward to the current year to increase cash flow. ROI: Varies widely. Median ranges from 10:1 to 100:1. Utilization Schedule: Benefit realized in the first year and often for the 5 - 10 subsequent years. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Business provides service provider with address of the building, specifications and drawings of the building, and the tax asset schedule from the most recent tax return or building costs for new constructions. Business also facilitates a site visit by the service provider. Risks: Cost Segregation is a low-risk tax position with low audit rates. Risk exposure occurs when Cost Segregation positions are either (1) not supported by documentation or (2) the segregation of building costs is incorrect. Risk Timing: This tax deduction is not currently a red flag to the IRS. If an audit were to occur this would most likely happen, if at all, 2-3 years from the date filed. Process: Business provides service provider with documentation, access to building for the site visit cost segregation report will then be delivered to the client who will give this report to their tax provider to include with the tax return when filed. Common Industries: Applies to all real estate held for profit. Authorities For Further Research: Internal Revenue Code §167; IRS Publication 946; IRS Cost Segregation Audit Techniques Guide; Revenue Procedure (Rev. Proc.) 62-21, 1962-2 C.B. 418. Update Service Information * * * * * Research & Development Credit Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: Federal tax credit for businesses who make technical improvements to products, processes, computer software, techniques, formulas, or inventions. ROI: Typically between 3:1 and 6:1 Utilization Schedule: Reduction of tax liability is realized at the time on tax payment. Tax refunds often take between 3 to 9 months from filing. Deferred tax assets are recorded upon completion of the service. Payroll tax reduction realized as soon as the first quarter after filing the credit. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Business provides service provider with tax returns, general ledger details, profit & loss statements, W-2s, 1099-MISCs / NECs, R&D related contracts, and R&D workpapers for, at minimum, the year in which R&D is to be claimed and the 3 prior years. In some cases, the service provider will interview Business owners and employees involved in and familiar with the R&D; this maybe occur remotely or in-person on site at the business. Other Customer Costs: Lack of responsiveness and organization by the Business or lack of preparedness, expertise, or diligence by the service provider can increase the organizational time and energy required to complete the service. Risks: The IRS has increased scrutiny for certain R&D tax credits that come from unlikely businesses or outside the range of normal for the industry. Improper claims can result in forfeiture of the credit, additional interest, and penalties. Risk Timing: IRS audits most likely happen, if at all, 1-3 years from the date filed. Process: Business provides service provider with requested documentation. Service provider speaks with requested personnel at the Business. Service provider calculates the credit and delivers substantiating report. Tax credit claimed on tax return and/or amended tax return filed to claim refund. Common Industries: Automotive, Consumer goods, Aviation & Aerospace, Retail & eCommerce, Food & Beverages, Medical devices, Biotechnology, Oil & Energy, Financial services, Telecommunications, Renewables & Environment, Apparel & Fashion, Logistics & Supply Chain, Craft beer companies, Cannabis companies, Farmers & agriculture, Advertising/Marketing analytics, and Logistics. Authorities For Further Research: Internal Revenue Code §41; Audit Techniques Guide: Credit for Increasing Research Activities. Update Service Information * * * * * Submit If you are human, leave this field blank. Controversy & Dispute Resolution 8 Accordion - Level Z - Tax - Controversy & Dispute Resolution Commercial Property Value Reassessment & Appeal Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: Monitor a business's IRS account for either code changes input by the IRS that indicate forthcoming audits, tax liens, or other adverse IRS actions. The service also monitors certain taxpayer submissions to the IRS to check for irregularities to be corrected (e.g. missed payroll tax filings). Fee: Typically flat fee. Fee Schedule: Typically paid upfront for monitoring over a given time period. Customer Commitment: Business signs an IRS Form 2848, usually prepared by the provider. Risks: None. The Form 2848 nor the monitoring of a business's IRS increases any risk of adverse action from the IRS or otherwise flag the account for any additional scrutiny. Process: Business provides service provider the necessary information to complete IRS Form 2848. Service provider prepares the IRS Form 2848 and the business signs it. IRS Form 2848 is submitted to the IRS to give service provider access to business's IRs tax account for monitoring. Common Industries: All. Update Service Information * * * * * IRS Account Monitoring Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: Monitor a business's IRS account for either code changes input by the IRS that indicate forthcoming audits, tax liens, or other adverse IRS actions. The service also monitors certain taxpayer submissions to the IRS to check for irregularities to be corrected (e.g. missed payroll tax filings). Fee: Typically flat fee. Fee Schedule: Typically paid upfront for monitoring over a given time period. Customer Commitment: Business signs an IRS Form 2848, usually prepared by the provider. Risks: None. The Form 2848 nor the monitoring of a business's IRS increases any risk of adverse action from the IRS or otherwise flag the account for any additional scrutiny. Process: Business provides service provider the necessary information to complete IRS Form 2848. Service provider prepares the IRS Form 2848 and the business signs it. IRS Form 2848 is submitted to the IRS to give service provider access to business's IRs tax account for monitoring. Common Industries: All. Update Service Information * * * * * IRS Penalty Abatement Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: Recover or reduce IRS penalties as far back as 2001 for failing to file a tax return, pay on time, and/or to deposit taxes when due. ROI: Reductions of penalty balances due occur immediately. IRS refunds can take between 2 weeks and 6 months. Fee: Typically 5%-30% of the value recovered. If negotiated, usually the larger the recovery the lower percentage paid. Fee Schedule: Depends on the Business's financial circumstances as well as the size of the recovery. Typically, smaller recoveries require payment upfront while larger recoveries split invoices, 1 to start the service and 1 at the complete of the service or upon actual recovery by the Business. Customer Commitment: Business signs an IRS Form 2848, usually prepared by the provider. Risks: There are two timing risks. First, if a penalty is still accruing, the service does not stop more penalties from accruing, it only abates previously accrued penalties. For example, if the Business is late on paying their Federal income taxes they are accruing penalties for failure to pay. If the penalties already accrued are abated before the Business pays its Federal income taxes, then failure to pay penalties will continue to accrue after the abatement. In this case, the taxes should be paid first, then the Business should seek abatement of the penalty. The second timing risk is choosing which year to request. Typically, except for particular circumstances, penalty abatements must occur at least 3 years apart. So if the Business is expecting to incur a larger penalty this year then they have in the three previous years, then the Business should wait until the penalty for this year has accrued and seek abatement for the largest penalty within a 4 year period. Process: Business provides service provider the necessary information to complete IRS Form 2848. Service provider prepares the IRS Form 2848 and the business signs it. IRS Form 2848 is submitted to the IRS to give service provider access to business's IRs tax account for investigation into penalty abatement opportunities. Once identified, the service provider often presents those opportunities to the Business, negotiates a fee, then contacts the IRS on the Business's behalf to negotiate for the penalty abatement. Common Industries: All Authorities For Further Research: Internal Revenue Manuals (IRM) 20.1.1.3.3.2.1 Penalties Eligible for Abatement: Internal Revenue Code (IRC) 6651; IRC 6656; IRC 6698; IRC 6699 Update Service Information * * * * * Submit If you are human, leave this field blank. International 8 Accordion - Level Z - Tax - International Foreign Bank Account and Foreign Financial Asset Reporting This service is under construction. Please be patient. Update Service Information * * * * * Transfer Pricing This service is under construction. Please be patient. Update Service Information * * * * * Submit If you are human, leave this field blank. Submit If you are human, leave this field blank. Legal 8 Accordion - Level 2 - Legal Bankruptcy 8 Accordion - Level Z - Legal - Bankruptcy No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Business & Corporate 8 Accordion - Level Z - Legal - Business & Corporate Corporate Transparency Act Go to RFP Email RFP Servicing: FederalRequest New Service Area Read Legal Services Notice Service Description: The Corporate Transparency Act (CTA) is a federal law that requires most corporations, limited liability companies, and any other company created by filing a document with a state to report information about their beneficial owners to the Financial Crimes Enforcement Network (FinCEN). It's purpose is to help prevent and combat money laundering, terrorist financing, corruption, and tax fraud. Benefit: It is unlawful for any person to willfully fail to report complete or update beneficial ownership information to FinCEN. Any person violating the reporting requirements of the Corporate Transparency Act is liable for civil penalties of not more than $500 for each day that the violation continues and criminal penalties of imprisonment of up to two years and fines of up to $10,000. Fee: Flat fee or hourly. Process: 1. Create FinCEN ID (https://fincen.gov/boi) 2. File Beneficial Ownership Information Report using E-Filing system (https://fincen.gov/boi) Authorities For Further Research: 1. Financial Crimes Enforcement Network (https://fincen.gov/boi) 2. 2021 National Defense Authorization Act - Implementing legislation 3. 31 U.S.C. 5336 - Beneficial ownership information reporting requirements 4. 31 CFR 1010.380 - Implementing Regulation Update Service Information * * * * * Submit If you are human, leave this field blank. Contract 8 Accordion - Level Z - Legal - Contract No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Employment 8 Accordion - Level Z - Legal - Employment No Service Listed At This Time This service is under construction. Please be patient. Update Service Information * * * * * If you are human, leave this field blank. Submit Import/Export 8 Accordion - Level Z - Legal - Import/Export No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Injuries & Torts 8 Accordion - Level Z - Legal - Injuries & Torts No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Insurance 8 Accordion - Level Z - Legal - Insurance No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Intellectual Property 8 Accordion - Level Z - Legal - Intellectual Property No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Privacy, Internet & Data 8 Accordion - Level Z - Legal - Privacy, Internet & Data No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Patent 8 Accordion - Level Z - Legal - Patent No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Real Estate 8 Accordion - Level Z - Legal - Real Estate No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Securities, Finance & Fundraising 8 Accordion - Level Z - Legal - Securities, Finance & Fundraising No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Submit If you are human, leave this field blank. Trademark 8 Accordion - Level Z - Legal - Trademark No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Tax 8 Accordion - Level Z - Legal - Tax No Service Listed At This Time Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit Submit If you are human, leave this field blank. Audit 8 Accordion - Level Z - Audit Financial Audit Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Information Systems Audit Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Financial Reporting Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Compliance Audit Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Investigation Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * If you are human, leave this field blank. Submit IT & Cyber Security 8 Accordion - Level Z - IT & Cyber Security SOC 2 Compliance Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Virtual or Fractional CISO (Chief Information Security Officer) Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Cyber Security Consulting Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * CMMC Compliance Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Penetration Testing Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Managed Detection and Response (MDR) Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Network Security Monitoring Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Submit If you are human, leave this field blank. Accounting & Bookkeeping 8 Accordion - Level Z - Accounting & Bookkeeping Cash Flow Analysis This service is under construction. Please be patient. Update Service Information * * * * * Virtual or Fractional CFO (Chief Financial Officer) Go to RFP This service is under construction. Please be patient. Update Service Information * * * * * Financial Reporting This service is under construction. Please be patient. Update Service Information * * * * * Bookkeeping This service is under construction. Please be patient. Update Service Information * * * * * Tax Accounting Email RFP Servicing: Federal, All StatesRequest New Service Area Service Description: Tax accounting is how a company determines its tax liability, which can differ from a company's financial accounting practices for determining its assets and liabilities on a balance sheet. Tax accounting is used by companies to help them make the proper tax calculations and prepare tax documents in time for filing season. Benefit: Tax accounting is used by companies to: 1. Make the proper tax calculations 2. Prepare tax documents in time for filing 3. Ensure compliance with tax and financial regulations to avoid penalties 4. Benefit from tax programs that can save them money on their taxes Common Industries: All Authorities For Further Research: ASC Topic 740, Income Taxes U.S. Code: Title 26 · Subtitle A Code of Federal Regulations: Title 26, Subtitle A Update Service Information * * * * * Forensic Accounting This service is under construction. Please be patient. Update Service Information * * * * * Submit If you are human, leave this field blank. Business Consulting 8 Accordion - Level Z - Business Consulting Inventory Management Go to RFP Email RFP Servicing: FederalRequest New Service Area Service Description: A federal tax deduction of up to $1.80 per square foot for building owners, tenants, or designers of buildings that meet or exceed a certain energy and power standard. Tenants may be eligible if they make energy efficient construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system's design, with the government owner's approval to transfer the deduction (that the public entity cannot use). The 179D tax deduction does not apply to other non-tax paying entities, including but not limited to NGOs or churches, unless there exists an energy-as-a-service agreement that is owned by a tax paying company. ROI: Median ranges from 5:1 to 20:1. Utilization Schedule: Federal tax benefit realized by a reduction in federal tax payments or, in the case of Net Operating Losses, in the year(s) in which the loss created by the deduction is applied. Fee: See ROI. Fee Schedule: Provider dependent. Typical arrangements include (1) Full payment up front, (2) Progress payments, and (3) Full payment upon completion. Depending on the time of year, payments usually occur before benefit is realized. Customer Commitment: Provide service provider with building drawings and specifications, costs associated with the purchase or construction of the building, allow for a site visit and access to building utility systems which typically take less than a day (requires a contact/representative on site), and contact with tax preparer. Risks: This is a relatively low risk tax position since a certified engineer is required for sign off. Low audit rates and easy to prove if audited. Risk Timing: This tax deduction is not currently a red flag to the IRS so audits of the 179D Deduction would most likely happen, if at all, 2-3 years from the date filed. Process: Provide documentary information listed above, arrange and execute site visit, service provider calculates benefit (and maybe delivers a report) and will have an engineer certified in this deduction sign off, then the deduction is included in the tax return and filed. A change in accounting method form can be included in the current year tax return to claim benefits from prior tax years. Common Industries: Manufacturing and Commercial Development. Not restricted to any specific industry, just need an energy efficient building. Authorities For Further Research: Title 26 USC §179D for original law. Consolidated Appropriations Act 2021 makes the law permanent. There are various Internal Revenue Bulletins, Public Laws, IRS Memoranda, and IRS Notices that update and change the provisions of the original law. Update Service Information * * * * * Sustainability Readiness Assessment Email RFP Servicing: FederalRequest New Service Area Service Description: Exams your current business practices and benchmarks them against the critical ESG material issues for your industry, providing insights into what your competitors are doing and what your investors, customers, workers, and communities desire from your business. The assessment may include outputs such as: an industry-specific materiality assessment, a review of major ESG frameworks and a recommendation to utilize the most relevant framework(s) based on a company’s strategic plan and ESG goals. Update Service Information * * * * * Sustainability Roadmap Email RFP Servicing: FederalRequest New Service Area Service Description: A collaboration between your leadership team and provider to identify your company's Environmental, Social and Governance (ESG) priorities, create initiatives, strategize the initiatives to minimize risks and take advantage of market opportunities, and ultimately create an actionable implementation plan. Update Service Information * * * * * Sustainability Program Implementation Email RFP Servicing: FederalRequest New Service Area Service Description: Establishing your company's ESG program with objectives and key results to advance initiatives. This may required investment in outsourced program management if the internal resources are unable to support the program. Update Service Information * * * * * Sustainability Reporting Strategy Email RFP Servicing: FederalRequest New Service Area Service Description: Selecting the best tools and tactics to publicly disclose corporate environmental, social, and governance (ESG) data in order to maximize the desired impact on stakeholders and the company itself. Update Service Information * * * * * Sustainability Certification Guidance Email RFP Servicing: FederalRequest New Service Area Service Description: Assistance to help your company achieve the desired ESG, build alignment and engagement with your ESG Certification to support recruiting and retention, and coordinating with branding professionals to share ESG Certification and successes with investors, customers, and your community. Update Service Information * * * * * Submit If you are human, leave this field blank. Compliance 9 Accordion - Level Z - Compliance Cash Flow Analysis This service is under construction. Please be patient. Update Service Information * * * * * Virtual or Fractional CFO (Chief Financial Officer) Go to RFP This service is under construction. Please be patient. Update Service Information * * * * * Financial Reporting This service is under construction. Please be patient. Update Service Information * * * * * Bookkeeping This service is under construction. Please be patient. Update Service Information * * * * * Forensic Accounting This service is under construction. Please be patient. Update Service Information * * * * * If you are human, leave this field blank. Submit Employment Services 9 Accordion - Level Z - Employment Services Cash Flow Analysis This service is under construction. Please be patient. Update Service Information * * * * * Virtual or Fractional CFO (Chief Financial Officer) Go to RFP This service is under construction. Please be patient. Update Service Information * * * * * Financial Reporting This service is under construction. Please be patient. Update Service Information * * * * * Bookkeeping This service is under construction. Please be patient. Update Service Information * * * * * Forensic Accounting This service is under construction. Please be patient. Update Service Information * * * * * If you are human, leave this field blank. Submit ESG 9 Accordion - Level Z - ESG Cash Flow Analysis This service is under construction. Please be patient. Update Service Information * * * * * Virtual or Fractional CFO (Chief Financial Officer) Go to RFP This service is under construction. Please be patient. Update Service Information * * * * * Financial Reporting This service is under construction. Please be patient. Update Service Information * * * * * Bookkeeping This service is under construction. Please be patient. Update Service Information * * * * * Forensic Accounting This service is under construction. Please be patient. Update Service Information * * * * * If you are human, leave this field blank. Submit Increase Cash 9 Accordion - Level Z - Increase Cash Cash Flow Analysis This service is under construction. Please be patient. Update Service Information * * * * * Virtual or Fractional CFO (Chief Financial Officer) Go to RFP This service is under construction. Please be patient. Update Service Information * * * * * Financial Reporting This service is under construction. Please be patient. Update Service Information * * * * * Bookkeeping This service is under construction. Please be patient. Update Service Information * * * * * Forensic Accounting This service is under construction. Please be patient. Update Service Information * * * * * If you are human, leave this field blank. Submit Property Services 9 Accordion - Level Z - Property Services Cash Flow Analysis This service is under construction. Please be patient. Update Service Information * * * * * Virtual or Fractional CFO (Chief Financial Officer) Go to RFP This service is under construction. Please be patient. Update Service Information * * * * * Financial Reporting This service is under construction. Please be patient. Update Service Information * * * * * Bookkeeping This service is under construction. Please be patient. Update Service Information * * * * * Forensic Accounting This service is under construction. Please be patient. Update Service Information * * * * * If you are human, leave this field blank. Submit Reduce Costs 9 Accordion - Level Z - Reduce Cost Cash Flow Analysis This service is under construction. Please be patient. Update Service Information * * * * * Virtual or Fractional CFO (Chief Financial Officer) Go to RFP This service is under construction. Please be patient. Update Service Information * * * * * Financial Reporting This service is under construction. Please be patient. Update Service Information * * * * * Bookkeeping This service is under construction. Please be patient. Update Service Information * * * * * Forensic Accounting This service is under construction. Please be patient. Update Service Information * * * * * If you are human, leave this field blank. Submit Risk Reduction 9 Accordion - Level Z - Risk Reduction Cash Flow Analysis This service is under construction. Please be patient. Update Service Information * * * * * Virtual or Fractional CFO (Chief Financial Officer) Go to RFP This service is under construction. Please be patient. Update Service Information * * * * * Financial Reporting This service is under construction. Please be patient. Update Service Information * * * * * Bookkeeping This service is under construction. Please be patient. Update Service Information * * * * * Forensic Accounting This service is under construction. Please be patient. Update Service Information * * * * * If you are human, leave this field blank. Submit Request New Service Submit If you are human, leave this field blank. Learn More More Services To deliver your business more benefits. Better Prices From global competition for your business. Personalized Engagements With the kind of service providers you want to work with. Less Time Searching for providers and filling out requests for proposals. Which are you . . . A Businesslooking for Professional Services while busy doing your actual job A Providerthat delivers Professional Services and wants to win more business We help businesses find, get, and manage professional services. We help service providers grow their business while reducing time and cost of winning business. Find Service Complete RFP Request Proposals Receive Proposals Choose Proposal Create Free Business Account Simplicity Built For You Getting Professional Services like tax, legal, audit, cyber security and more doesn’t need to be difficult. Rbundle can: Save your business hours, days, even weeks in the request for proposal process Get your business more competitive pricing from more preferred providers Find your business more beneficial services to improve your business Create Free Business Account See how easy it is to get proposals Create an anonymous account that protects the identity of your business Browse or search by name the professional services your business needs Use the Common RFP that minimizes the information needed from your business Rbundle will even find your business services it is eligible for Organize and compare your proposals to choose the best fit See how easy it is to get proposals Business Benefits Better Prices Less Time More Services Preferred Providers Receive RFP
